| D-126-00 - Mini Fragment Instrument and implant set |
|
| 196-126-03 - Aluminium Case and Upper Tray |
|
| 196-148-01 - Lower Case |
|
| |
| Consisting of Below Mention instruments: |
| Instruments for Mini Screws 2.0mm or 2.7mm |
| Drill Bit 2.0mm with Quick Coupling for small air drill |
2 |
2.0+2.7 |
| Drill Bit 2.7mm with Quick Coupling for small air drill |
2 |
2.7 |
|
| Small Countersink with end to fit Quick coupling handle |
1 |
2.7 |
|
| Tap, 2.7mm with end to Quick Coupling handle |
2 |
2.7 |
|
| Handle with quick coupling |
1 |
| Drill Guide and Drill Sleeve for 2.0mm , drill bit |
1 |
2.0+2.7mm |
|
| Tap Sleeve 3.5mm |
1 |
2.7 |
|
| Small Hexagonal Screwdriver 2.5mm with holding sleeve |
1 |
2.7 |
|
| Depth Gauge (only for 2.7mm screws) |
| Instruments for Mini Screws 1.5mm or 2.0mm |
| Drill Bit 1.1mm with Quick Coupling for small air drill |
2 |
1.5 |
|
| Drill Bit 1.5mm with Quick Coupling for small air drill |
2 |
2.0 |
|
| Mini Countersink to fit Handle with mini quick coupling |
1 |
1.5+2.0 |
|
| Tap, 1.5mm with end to Mini Quick Coupling |
2 |
1.5 |
|
| Tap, 2.0mm with end to Mini Quick Coupling |
2 |
2.0 |
|
| Handle with mini quick coupling |
1 |
| Mini Drill Sleeve for 1.1 and 1.5mm Drill Bits |
1 |
1.5+2.0 |
|
| Depth Gauge (only for 2.0mm screws) |
1 |
|
|
| General Instrumentation |
| Sharp Hook |
1 |
| Screw Driver 1.5mm with holding sleeve |
1 |
| Bending Iron for finger plates |
1 |
| Holding Foreceps for small plates |
1 |
| Reduction Forceps with Points |
1 |
| Small Retractor , 6mm |
1 |
| Small Retractor , 8mm |
1 |
| Retractor for small fragments, with broad shank , short |
2 |
| Periosteal Elevator, small with straight edge 3mm |
1 |
|
|
| And below mentioned Implants Sets |
| Implants for 2.7 mm screws |
!Implants for 1.5 or 2.0 mm screws |
| 2.7 mm cortical screws - 50 nos. |
1.5 mm cortical screws - 36 nos. |
| Small washers - 6 nos. |
2.0 mm screws - 32 nos. |
| Quarter Tubular plate - 9 nos. |
mini straight plate - 6 nos mini |
| L - plate - 4 nos. |
mini L plate - 4 nos. |
| T- Plate - 4 nos. |
T plate - 4 nos. |
| |
K - Wire - 50 nos. |
|
