| D-124-00 |
Basic Instrument set for Screws & Plates |
| |
4.5mm & 6.5 mm |
| 196-047-17 |
Aluminum case |
| 196-124-01 |
S.S Tray for screws |
| 196-124-02 |
Tray Plastic |
| Consisting of |
|
| Drill Bit 3.2mm with end to fit Quick Coupling for small air drill |
3 |
| Drill Bit 4.5mm with end to fit Quick Coupling for small air drill |
2 |
| Malleolar Countersink, 3.2mm tip, for Malleolar screws |
1 |
| Tap Handle for 4.5mm and 6.5mm Taps and Countersink |
1 |
| Tap , 4.5mm |
2 |
| Tap , 6.5mm |
1 |
| Tap Sleeve, 3.5mm (also to be used as 3.2mm drill guide) |
1 |
| Insert Drill Sleeve, 4.5mm / 3.2mm, 58mm len |
1 |
| Tap Sleeve, 4.5mm (also to be used as 4.5mm drill guide) |
1 |
| Pointed Drill Guide |
1 |
| Hexagonal Screwdriver , width across flats 3.5mm |
1 |
| Hexagonal Screwdriver for quick coupling, width across flats 3.5mm |
1 |
| Depth Gauge for 4.5 and 6.5mm screws |
1 |
| Sharp Hook |
1 |
| Drill Sleeve for tension device |
1 |
| Drill Sleeve for 3.2mm plates, 40mm length, for round-hole plates |
1 |
| Tension Device, 8mm span |
1 |
| Articulated Tension Device with gauge, 20mm span |
1 |
| Socket Wrench, width across flats 11mm |
1 |
| Combination Wrench, width across flats 11mm |
1 |
| Neutral and Load Drill Guide, 3.2mm |
1 |
| Bending Template, 5 holes |
1 |
| Bending Template, 7 holes |
1 |
| Bending Template, 9 holes |
1 |
| Countersink, 4.5mm |
1 |
| D-124-03 |
Basic set for Screws 4.5mm & 6.5 mm |
| 196-047-17 |
Aluminum case |
| 196-124-01 |
S.S Tray for screws |
| 196-124-02 |
Tray Plastic |
| Consisting of 4.5 mm cortical screws |
194 nos. |
| Consisting of 4.5 mm malleolar screws |
22 nos. |
| Consisting of 6.5 mm Cancellous screws(16mm thread) |
44 nos. |
| Consisting of 6.5 mm Cancellous screws(32 mm thread) |
28 nos. |
| Consisting of 6.5 mm Cancellous screws(Fully thread) |
15 nos. |
| Screws Forceps |
1 nos. |
| Washers for 6.5 mm Cancellous screws |
6 nos |
